Raptor-Incubator for best control of incubating
The perfect incubator for breeders of birds of prey, who want to (and can) bring every single chick to hatching, because of their knowledge in incubating and because of their daily control/weighing of the eggs.
For this, the HEKA-raptor-incubator "Falcon" offers the best possible basis:
Our HEKA-microprocessor-control we have developed (with our experience for decades) with the aim, that the regulation of temperature and humidity is more precise than every other control, used in incubators. And our experience confirms again and again, that we not only achieved this, but that also the reliability of our HEKA-microprocessor-control is unexcelled.
The double-walled air-circulation-system, which is serially included in all HEKA-incubators, moreover guarantees, that the temperature is absolutely equal everywhere, where you can place eggs.
The height of the cabin and the placing of the turning-mechanism below the incubating-tray make it easy to take out eggs for weighing (control of loss of weight) or for transferring to another incubator (with more or less humidity).
The fully-automatic humidification you just need seldom or in few incubators - but our experience shows, that breeders of birds of prey like to get the absolute optimum and do not want to make compromises. Therefore the fully-automatic humidification with its precise display of humidity is serially included in our raptor-incubator "Falcon".
1. Fully-automatic egg-turning

turning-motor (exterior, covered), which is
connected with the trays by a push-rod and
the white connectors (powder-coated alumi-
nium) - the motor pushes and pulls the trays
automatically forward and backward. For best
success in brooding, all our incubators do 12
turnings per day. With connectors of different
length, you can turn any number of trays. Of
course, this turning can be reprogrammed or
deactivated by you for hatching-phase.
2. Fully-automatic humidification

are equipped with an absolutely fully-automatic
humidification. Regularly we include a water-
canister, which is the water reservoirs for the
humidification. It's also possible to connect the
incubator directly to your water line. Gladly we
then adjust your machine for this higher water
pressure - a short message is enough. A float
valve regulates the water supply out of the
canister or out of the water line. Everytime while
heating (continuously at heating up; in short
impulses, if set-temperature is reached), a water-
heating gets acticated, which heats the water and
evaporates it. A failure-free and reliable
3. HEKA-microprocessor controls
The centrepiece of this incubator is the micro-
processor control developed by HEKA.
Regarding precise control mode as well as
reliability (failure rate under 0,1% in the first
5 years) this controls probably stands head
and shoulder above all other producers'
controls. Temperature, humidity and cooling-
down can be programmed with 4 buttons
without the slightest effort.
4. Insulated glazing
The raptor-incubator "HEKA Falcon" is
serially equipped with double glazing. The
insulation value is much better in comparison to
single glazing, whereby the power-consumption
decreases. Further, insulated glazing begins to
steam up just up from ~80% humidity - beyond
those values, which are needed normally..
More detailed information
You find more information about the series HEKA-"Favorit-Olymp", to which this incubator basically belongs hereAccessories
The incubator is completely equipped with all the accessories, which are needed. Included is the interior lighting of the incubator, one tray, a water canister, a detailed manual and the connector for turning the tray.Further, reasonable accessories, which are not included, could be a candling lamp for checking eggs on fecundity; a scale; more trays/hatching-trays (if needed) and the right disinfectant for cleaning/disinfecting the incubator after hatching (we recommend: Amo-Des).
Technical Details
2 years warranty
Dimensions: Width 50 cm, Depth 50 cm, Height 65 cm,
Weight ca. 35 kg, power-consumption in 24h, ca. 0,6 kW