Large, stable siphon poultry drinker made from sturdy, durable plastic. Available with a capacity of 20 or 40 litres. The water reservoir is conveniently filled from above through a screw cap. The siphon system replenishes the water in the raised drinking bowl as the birds drink. Sturdy support legs provide stability and help reduce contamination of the drinking water by bedding material. Quality product manufactured in Europe.
Generous water capacity with a siphon system
This siphon drinker is particularly suitable for providing drinking water to larger groups of poultry.
Water is stored in the enclosed reservoir and supplied to the drinking bowl below through the siphon system. As the birds drink, water flows from the reservoir to replenish the bowl.
The overhanging reservoir partially shields the drinking area from above while keeping the water accessible to the birds.
As the drinker has its own water reservoir, no connection to a mains water supply is required.
Easy filling from above
The reservoir is equipped with a screw cap at the top. This allows convenient refilling without turning the entire drinker upside down.
Important when filling: Close the water valve at the base before refilling. Open the top screw cap, fill the reservoir with fresh drinking water and securely replace the cap. Then open the lower valve to allow water to flow into the drinking bowl.
Sturdy legs and raised drinking area
The drinker stands on robust plastic legs approximately 16 cm high.
The raised drinking bowl helps prevent bedding material, dust and dirt from the ground from entering the water.
The design still allows the birds to access the drinking bowl comfortably. Because of its raised position, the drinker is particularly suitable for appropriately sized or adult poultry.
Support legs are included with both capacities.
Technical specifications
| Feature |
20 L version |
40 L version |
| Capacity |
20 litres |
40 litres |
| Manufacturer's specified diameter |
51.5 cm |
51.5 cm |
| Manufacturer's specified overall height |
61 cm |
82.5 cm |
| Leg height |
16 cm |
16 cm |
| Material |
Polypropylene |
Polypropylene |
| Filling |
From above |
From above |
| Closure |
Screw cap |
Screw cap |
| Water supply |
Valve-controlled siphon system |
Valve-controlled siphon system |
Matching feeder available
A matching plastic feeding silo with a feed capacity of 15 or 30 kg is also available. It features a similarly sturdy design and comes in two sizes.
Product features
-
Large siphon drinker for poultry
-
Available in 20- or 40-litre capacities
-
Made from strong, durable polypropylene
-
Convenient top filling
-
Practical screw cap
-
Lower valve to control the water outlet
-
Water automatically replenished in the drinking bowl
-
Stable base with robust plastic legs
-
Drinking area raised by approximately 16 cm
-
Overhanging reservoir offers additional protection from contamination
-
No mains water or electricity connection required
-
Quality product manufactured in Europe
Scope of delivery
One complete plastic siphon drinker in the selected size, including reservoir, drinking bowl, valve, screw cap and support legs.
Instructions for use
Place the drinker on a level, load-bearing surface. Remember that the filled 40-litre version is particularly heavy.
Close the lower valve before filling. Add fresh drinking water through the opening at the top, securely replace the screw cap and then open the lower valve.
Check that water flows correctly into the drinking bowl.
Check the water level, cleanliness and correct operation of the drinker daily. Clean the reservoir and drinking bowl regularly and replace the drinking water.
