Compact plastic drinking bowl with mounting plate and screw fastening for attaching to wire mesh or suitable cage walls. Designed for low-pressure drinking systems with a 1/4" hose connection. Available with a small bowl (3.5 cm diameter) or a large bowl (4.5 cm diameter).

This practical drinking bowl offers a space-saving way to provide water to poultry and small animals. The mounting plate and screw fastening allow the drinker to be attached to suitable wire mesh or cage walls.

Water is supplied through a 1/4" hose from a compatible low-pressure system. The integrated mechanical inlet makes it possible to supply water without placing a separate reservoir directly at the drinking point.

Two Bowl Sizes Available

Choose the version that best suits your installation:

The small bowl provides a particularly compact drinking point. The larger version offers a wider and deeper drinking area.

Mechanical Water Supply

In the small version, the animal can press the operating tongue inside the bowl to release water into the drinking area.

The drinker operates mechanically and does not require electricity. With a suitable low-pressure water supply, water is provided through the connected hose.

The internal inlet mechanism may differ between the two bowl sizes.

Mounting Plate with Screw Fastening

The integrated mounting plate is designed for secure attachment to suitable wire mesh or a cage wall.

This makes it easy to position the drinker at a suitable drinking height while keeping the installation compact.

The small dimensions are particularly useful where space inside the enclosure is limited.

Low-Pressure Operation Only

This drinking bowl must be supplied from a suitable low-pressure water system.

A pressure compensation tank can be used to provide water from a pressurised supply at the much lower pressure required by the drinker.

Important: The water surface in the supply reservoir must not be more than 50 cm above the drinking bowl. This corresponds to approximately 0.05 bar of static water pressure.

A greater height difference can cause excessive pressure and leakage.

Do not connect the drinking bowl directly to full mains water pressure.

Product Features

• Compact plastic drinking bowl

• Mounting plate with screw fastening

• For suitable wire mesh and cage walls

• Two available bowl sizes

• Diameter: 3.5 cm or 4.5 cm

• Bowl depth: 2.5 cm or 3.5 cm

• Connection for 1/4" hose

• Mechanical water supply without electricity

• For compatible low-pressure systems only

• Maximum reservoir height difference: 50 cm

Scope of Delivery

1 plastic drinking bowl with mounting plate and screw fastening in the selected size.

Not included: Water supply hose, pressure compensation tank or additional hose adapters.

Installation and Use

Secure the drinking bowl to suitable wire mesh or a cage wall. Install it at a height that allows the animals to drink comfortably.

Connect the 1/4" inlet to a compatible low-pressure water supply.

Ensure that the water surface in the reservoir is no more than 50 cm above the drinker.

After installation, check that the water inlet operates correctly and that all connections are watertight. Clean the bowl and inlet mechanism regularly.

Protect water-filled hoses from freezing and check daily that the animals have access to enough drinking water.