Outer dimensions: Width 73 cm, Height 36.5 cm, Depth 34 cm

The pigeon cells are stackable in any number, both vertically and horizontally, suitable for any loft size. The cell grids are easily adjustable. The cell can also be converted into a winter roost. Made of formaldehyde-free E1 board.

Assembly Instructions (excerpt; full version available for download: click on "Media" below the product image):

Components:

• Base plate: 4 pre-drilled holes for attaching the side panels
• Top plate: as mentioned above, plus 2 recesses for the door grids (orientation towards the inside of the box)
• Side panels: rail for door closure sliders (orientation: front; holes for dowels facing downward)
• Door grids A+B: arrangement can be swapped as needed
• Back panel (attach locking mechanism as needed, top or bottom)
• Door closure sliders (attach as needed, top or bottom, according to the back panel)
• Plastic clamp for opening the small wooden door
• Dowels, screws, nails

It is recommended to proceed with the assembly as follows:

1. Attach the side panels to the base plate, and then secure the top plate (with recesses facing inward) using the provided long screws.
2. Carefully insert the dowels into the side panels, about ¾ of the way in, and place the wire mesh floor according to the illustrations. If the wire mesh floor falls through when in the far left/right position, adjust the position of the dowels.
3. Next, attach the back panel in any desired order using the provided nails (position the locking mechanism at the top/bottom, based on the position of the door closure sliders on the door grids), screw the locking mechanisms onto the door grids using the short screws, and mount the doors into the pigeon cell by applying gentle pressure.