Extremely sturdy, durable plastic poultry drinkers with an easy-to-operate bayonet closure. Available in capacities of 5, 8.5 or 12 litres, optionally with a drinking trough guard ring and/or metal stand. All three sizes have the same footprint, allowing the accessories to be used interchangeably. Quality product manufactured in Europe.
These poultry drinkers are suitable for the daily supply of drinking water to chickens and other suitable poultry. Thanks to the practical bayonet closure and an additional screw-cap opening in the bottom of the drinker, there are two ways to fill the reservoir.
Two convenient filling methods
The poultry drinkers feature an easy-to-operate bayonet closure that securely connects the water container to the drinker base.
The drinker can be filled like a conventional bayonet-lock drinker: detach the base from the reservoir, fill the container with fresh drinking water and securely close it again.
Alternatively, the drinkers can be filled through the additional screw cap in the bottom. This means that the bayonet connection does not need to be released each time the drinker is refilled.
As the birds drink, water flows from the reservoir into the lower drinking trough to replenish the supply.
Optional drinking trough guard ring
The poultry drinkers are available with or without an additional guard ring for the drinking trough.
The ring is fitted around the drinking trough, providing an additional accessory for the drinker base.
As all three sizes have the same footprint, the guard ring fits every version.
Optional sturdy metal stand
The drinkers can be ordered with or without a metal stand.
The sturdy metal stand attaches to the drinker base and raises the drinker above the ground. This can help reduce contamination of the drinking water from bedding material.
The metal stand is suitable for all three sizes and can be used with or without the guard ring.
Three capacities with the same footprint
| Capacity |
Footprint diameter |
| 5.0 litres |
31.0 cm |
| 8.5 litres |
31.0 cm |
| 12.0 litres |
31.0 cm |
All sizes use the same-sized drinker base, allowing the accessories to be combined regardless of capacity.
The stated diameters refer to the footprint of each drinker and are particularly important when choosing a suitable base or drinker heater.
HEKA drinker heater for colder months
With a footprint of 31 cm, these drinkers may be suitable for the HEKA drinker heater, 33 cm (24 W), optional thermostat.
The heater is available with or without a thermostat.
Important: The drinker must rest fully and securely on the heater without the metal stand fitted. Check that the combination fits safely before use. The drinker heater is sold separately and is not included.
Product features
-
Poultry drinker with an easy-to-operate bayonet closure
-
Made of sturdy, durable plastic
-
Capacity: 5, 8.5 or 12 litres
-
Additional screw cap for filling
-
Two ways to fill the drinker
-
Available with or without a drinking trough guard ring
-
Available with or without a sturdy metal stand
-
Identical footprint for all three sizes
-
Accessories interchangeable between sizes
-
Water replenishment from the filled reservoir
-
No electricity or mains water connection required
-
Quality product manufactured in Europe
Scope of delivery
The selected version is supplied:
-
Poultry drinker in the selected size
-
With or without an additional drinking trough guard ring
-
With or without a metal stand
A rain cover is included only if it is expressly specified as part of the selected variant.
Instructions for use
Fill the reservoir with fresh drinking water and ensure that all closures are fully secured before placing the drinker in position.
Use the optional metal stand on a level, stable surface. Make sure the birds can easily reach the drinking trough.
Check the water level and cleanliness of the drinking trough every day. Clean the drinker regularly and replace the drinking water.